Finishing Plate 30-45º, 150mm (200mm) Black
Finishing Plate 30-45º, for 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System.
N B The hole is for 200mm external diameter chimneys.
The Finishing Plate comes in two parts and is used to tidy the area around the flue as it passes through a non-combustible ceiling or wall.
IF INSPECTION ACCESS IS NOT NEEDED, you can use a non-combustible board such as 'masterboard' with heatproof plaster for a less visible cover.
The finishing plate is attached to the ceiling or wall where the flue enters at a 45° angle.
e.g. A lfue entering the wall at 45 degrees.
Use silicone to seal and screws to secure against the surface.
NOTE – The 150 diameter referred to in twin wall chimneys is the internal diameter - the external diameter is 200mm and is not used to describe the part.
| Diameter | 150mm internal / 200mm External |
|---|---|
| Colour | Black |
| CE Certification | EN1856-1 T600 N1 D V2 L50040 G50 |
| Inner Material | 316L Stainless Steel - 0.40mm thick |
| Outer Material | 304 Stainless Steel - 0.40mm thick |
Write Your Own Review
