All Chimney Products

Adapter to connect 150mm diameter Flue Pipe / Stove Pipe / Single Wall Pipe to the 150mm diameter TW Pro Twin Wall Insulated Chimney System.

Adapter to connect 150mm diameter Flue Pipe / Stove Pipe / Single Wall Pipe to the 150mm diameter TW Pro Twin Wall Insulated Chimney System.

Quarter Metre / 250mm / Length Straight Pipe 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System. EFFECTIVE LENGTH 200mm

Half Metre / 500mm / Length Straight Pipe 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System. Effective Length 450mm

One Metre Length Straight Pipe 150mm / 6" diameter

TW Pro Twin Wall Insulated Chimney System.

Effective length 950mm

The increaser adapter is used to connect a 5 inch diameter Flue Pipe / Stove Pipe to the 150mm diameter TW Pro Twin Wall Insulated Chimney System.

Chimney systems are referred to by their internal diameter, so a 150mm Chimney will be 200mm on the outside. 

150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System flue damper. Used to reduce up-draught within the chimney.

250mm - 350mm Adjustable Length Straight Pipe 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System.

350mm - 500mm Adjustable Length Straight Pipe 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System.

15º Bend, 150 / 6" diameter TW Pro Twin Wall Insulated Chimney System.

30º Bend, 150 / 6" diameter TW Pro Twin Wall Insulated Chimney System.

45º Bend, 150 / 6" diameter TW Pro Twin Wall Insulated Chimney System.

150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System, 90 Degree T Piece and locking band.

A 45º T Piece is also referred to as a 135º Tee.

It is required at the bottom of a run of vertical chimney to allow access through the bottom for cleaning, emptying fallen soot, and draining of water.

150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System T piece Cap with drain hole and locking band.

150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System. Adjustable Lateral Support bracket 80mm-130mm

NOTE - The diameter referred to in twin wall chimneys is the internal diameter - the external diameter is 50mm wider, and is not used to describe the bracket.

150mm / 6" diameter TW Pro Convesa Twin Wall Insulated Chimney System. Adjustable Lateral Support bracket 130-210mm

NOTE - The diameter referred to in twin wall chimneys is the internal diameter - the external diameter is 50mm wider, and is not used to describe the bracket.

Adjustable Base Support used at the base of a chimney stack to support the weight of the chimney, supports up to 20 metres height.

With locking band.

Console Plate used as the starter piece on top of a chimney where the stack has been removed, or on a prefabricated fireplace.

The Floor or Ceiling Joist Support is used as a support on the upper side of a floor or ceiling.

It is typically used in conjunction with a Fire-stop plate on the underside of the floor.

In stainless steel.

The Roof Support is attached to the rafters in the roof space to give the flue essential support at the point where the flue exits the roof.

A band to attach guy wires (not supplied) when the flue sticks out of the roof more than 2 metres

A Ventilated Firestop plate used when the chimney passes between floors

i.e when the chimney passes through the ceiling on the ground floor through to the first floor

NOTE - The diameter referred to in twin wall chimneys is the internal diameter - the external diameter is 50mm wider, and is not used to describe the vented firestop plate.

Finishing Plate 0-30º, for 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System.

N B The hole is for 200mm external diameter chimneys.

Finishing Plate 30-45º, for 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System.

N B The hole is for 200mm external diameter chimneys.

The Adjustable Wall Sleeve is used when the flue system passes through an outside wall.

Cut to 45 degree angle.

N B The sleeve is for 210mm external diameter / 150mm twin wall chimney systems

The storm collar protects the rubberised flashing from wear due to severe weather conditions.

For 150mm chimney with 200mm external diameter

Rubberised flashing with flexible alloy base suitable for profiled sheeting and flat panel surfaces.

For twin wall chimney systems with external pipe diameters of 150 to 280mm (6 to 11 inch)

i.e.internal diameters 4 to 9 inch)

A kit required to fit the flat / metal roof type flashing.

The kit comprises of:

8 x 5mm self tapping screws & waterproof washer screw caps

1 x 5mm drill bit

1 x 80ml tube of clear silicone

TWO KITS ARE USUALLY REQUIRED TO FIT ONE LARGE FLASHING

Rain Cap for 150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System.

Wind Cowl / Rain Cap 150 / 6" diameter TW Pro Twin Wall Insulated Chimney System.

Anti Downdraught Cowl 150 / 6" diameter TW Pro Twin Wall Insulated Chimney System.

A Building Regulations requirement. 

An adapter used when connecting a 150mm TW Pro Twin Wall Insulated Chimney on top of a 6" Flexible Flue Liner.

The Flue liner will be at the bottom and the twin wall chimney fitted above

An adapter for connecting a 155mm Flexible Flue Liner onto the top of a 150mm TW Pro Twin Wall Insulated Chimney.

The Flue liner will be above the twin wall chimney.

If the chimney extends 1.5m or more above the roof, a Roof Brace Kit is required to support the chimney.

If the chimney extends 1.5m or more above the roof, a Roof Brace Kit is required to support the chimney.