Support Brackets

A band to attach guy wires (not supplied) when the flue sticks out of the roof more than 2 metres

150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System. Adjustable Lateral Support bracket 50-80mm

NOTE - The diameter referred to in twin wall chimneys is the internal diameter - the external diameter is 50mm wider, and is not used to describe the bracket.

The Floor or Ceiling Joist Support is used as a support on the upper side of a floor or ceiling.

It is typically used in conjunction with a Fire-stop plate on the underside of the floor.

In stainless steel.

The Roof Support is attached to the rafters in the roof space to give the flue essential support at the point where the flue exits the roof.

Replacing the included locking band, the Structural Locking Band increases the maximum unsupported height of the chimney to 2.5m.

The Structural Locking Band must be used on the joint of each freestanding part.

A band to attach guy wires (not supplied) when the flue sticks out of the roof more than 2 metres

150mm / 6" diameter TW Pro Twin Wall Insulated Chimney System. Adjustable Lateral Support bracket 80mm-130mm

NOTE - The diameter referred to in twin wall chimneys is the internal diameter - the external diameter is 50mm wider, and is not used to describe the bracket.

If the chimney extends 1.5m or more above the roof, a Roof Brace Kit is required to support the chimney.

150mm / 6" diameter TW Pro Convesa Twin Wall Insulated Chimney System. Adjustable Lateral Support bracket 130-210mm

NOTE - The diameter referred to in twin wall chimneys is the internal diameter - the external diameter is 50mm wider, and is not used to describe the bracket.

A wall bracket to secure the flue to the wall, adjustable between 210mm and 420mm.
Offers lateral support only.
Wall brackets are generally used every 2500 mm.

Twin wall chimney systems are referenced by their INTERNAL diameter. The external diameter is 200mm.

Console Plate used as a load bearing support.

Adjustable Base Support used at the base of a chimney stack to support the weight of the chimney, supports up to 20 metres height.

Distance from side of chimney to wall is adjustable from 50 mm to 80 mm

Includes locking band.