Flexible Flue Liner to Twin Wall Adapter / 150mm
An adapter used when connecting a 150mm TW Pro Twin Wall Insulated Chimney on top of a 6" Flexible Flue Liner.
The Flue liner will be at the bottom and the twin wall chimney fitted above
The flexible flue liner will be at the bottom and the twin wall fitted above to continue a chimney:
Typically when a chimney stack and pot has been removed, a console plate could be used in this instance to support the metal twin wall chimney.
When connecting the Flue Liner to the adapter use 3 stainless steel self tapping screws (not supplied), and then seal all around using a high temperature sealant or fire cement.
NOTE – The 150 diameter referred to in twin wall chimneys is the internal diameter - the external diameter is 200mm and is not used to describe the part.
Twin wall chimney brands cannot be mixed.
| Diameter | 150mm internal / 200mm External |
|---|---|
| Colour | Stainless |
| CE Certification | EN1856-1 T600 N1 D V2 L50040 G50 |
| Inner Material | 316L Stainless Steel - 0.40mm thick |
| Outer Material | 304 Stainless Steel - 0.40mm thick |
Write Your Own Review
